LJ1 Oil Products Extreme SJ Synthetic Blend Racing Oils 2200 ppm Zn 2500 ppm Ca are based on API service level SJ additive technology. An additional boost of ZDDP is utilized taking the final formulation to 2200ppm Zinc. This extra amount of ZDDP provides excellent anti-wear protection. Also a performance boost of calcium based detergents is utilized to promote cleanliness in the engine. The use of this amount of anti-wear and detergent additives blended in quality paraffinic base oils makes these motor oils ideal for protecting an engine under extreme conditions. These products utilize a mixture of synthetic and conventional base stocks for extra performance and protection from oxidation that causes engine deposits.
* Zinc or zinc diakyl di-triphosphate (ZDDP) is widely used as an anti-wear additive used in many types of engine and hydraulic oils to protect heavily loaded parts from wear. ZDDP is a last resort against metal-to-metal contact.
Properties
Based on API service SJ additive technology with additional performance additives
High Sulfated Ash, Phosphorus & Sulfur (SAPS) formulation
Provides the ultimate anti-wear protection for high performance engines
Low oil volatility
Friction modified for enhanced engine power and performance
Application recommendations:
Extreme Racing Oils 2200 ppm Zn 2500 ppm Ca are recommended for high performance engines where exceptional engine protection is needed. These products are not for use in engines using catalytic converters as the concentrated additive formulation will damage emission components.
Typical properties:
|
Product: SJ Synthetic Blend Racing Oils 2200 ppm Zn, 2500 ppm CA |
|
|
|
|
|
Product Code |
HP20W-50 |
HPSAE-50 |
HPSAE-70 |
HP15W-40 |
|
SAE Viscosity Grade |
20W-50 |
50 |
70 |
15W-40 |
|
API Gravity |
29.6 |
29.2 |
27.9 |
32.1 |
|
Kinematic Viscosity @ 100 °C cSt (ASTM D-445) |
17.7 |
18.4 |
28.6 |
13.9 |
|
Kinematic Viscosity @ 40 °C cSt (ASTM D-445) |
153.6 |
195.9 |
385.2 |
95.7 |
|
Viscosity Index (ASTM D-2270) |
127 |
104 |
101 |
147 |
|
CCS, cP (ASTM D5293) |
6800 (-15C) |
N/A |
N/A |
3700 (-20C) |
|
Zn (ppm) |
2200 |
2200 |
2200 |
2200 |
|
Ca (ppm) |
2500 |
2500 |
2500 |
2500 |
|
P (ppm) |
2000 |
2000 |
2000 |
2000 |
|
TBN, mg KOH/g (ASTM D974) |
7.7 |
7.7 |
7.7 |
7.7 |
*Computer Estimated Property